Is There Enough Tread Left for Winter?
Most tires should be replaced when their tread reaches the manufacturer’s recommended wear limit. For winter driving in Canada, Transport Canada advises against using winter tires with less than 4 mm of tread. Knowing how to measure tire tread depth can help you identify wear before it affects your vehicle’s traction.
Your tires may have made it through last winter, but are they ready for another one? As temperatures drop and Ontario roads fill with rain, snow, and slush, your tires’ condition becomes even more important.
At Jiffy Lube®, we help drivers stay on top of routine vehicle maintenance, including tire checks that can help prepare their vehicles for changing road conditions. Before your next seasonal tire changeover, take a few minutes to see how much tread you have left
What Is Tire Tread Depth, and Why Does It Matter?
Tire tread depth measures how deep the grooves are in the part of the tire that contacts the road. These grooves help channel water away from the contact area and provide grip on wet, snowy, and slushy surfaces.
As your tires wear down, their ability to maintain traction can decrease. Worn tread increases the risk of hydroplaning on wet roads and makes it harder to maintain control in snow and slush.
Tread depth is usually measured in millimetres or 32nds of an inch. Checking it regularly helps you gauge how much usable tread remains and when to consider replacement.
How Deep Is the Tread on a New Tire?
New passenger vehicle tires typically start with about 10/32 to 11/32 of an inch of tread, though the exact depth varies by tire model and design.
As the tire wears, the remaining tread becomes less effective at maintaining grip in challenging conditions. For winter driving, Transport Canada advises against using winter tires with less than 4 mm of tread. Ontario’s legal minimum for most passenger vehicle tires is 1.5 mm, but meeting that minimum doesn’t mean a tire will provide good winter traction.
Here’s a quick reference for common tread depths:
| Tread depth | Millimetres | What it means |
|---|---|---|
| 10/32 in. | 7.9 mm | Common depth for a new tire |
| 8/32 in. | 6.4 mm | Substantial tread remains |
| 6/32 in. | 4.8 mm | Monitor wear, especially before winter |
| 4/32 in. | 3.2 mm | Winter traction may be compromised; assess replacement |
| 2/32 in. | 1.6 mm | At approximately the legal minimum; replacement is needed |
These figures are general reference points, not safety guarantees. Tire design, wear patterns, age, and driving conditions also matter.
How to Check Your Tire Tread Depth at Home
You don’t need a mechanic to perform a basic tread inspection. Three common methods let you check your tires, from a quick visual check to a precise measurement.
The Quarter Test: A Quick Canadian Check
The Canadian quarter test can provide a rough indication of how much tread remains.
- Park on level ground and make sure the vehicle is safely stationary.
- Insert a Canadian quarter into a main tread groove, with the caribou facing down.
- Look at how much of the coin is visible above the tread.
- Repeat the check in several grooves and on all four tires.
If the tread reaches well up the coin, you have more tread left. If most of the coin is exposed, your tires may be approaching the point where replacement should be considered.
Important: The quarter test is only a rough screening method. It doesn’t provide an exact tread-depth measurement or establish whether a tire is safe for winter driving. Use a tread depth gauge for a more reliable reading.
Using the Tread Wear Indicator Bars
Most passenger vehicle tires have small raised bars built into the main tread grooves. These are called tread wear indicators.
As the tire wears down, the tread surface approaches the height of these bars. When the surrounding tread reaches the indicators, the tire has reached its wear limit and should be replaced.
Check several locations around each tire because wear may not be even across the entire surface. Don’t rely on the indicators alone to assess winter readiness, since tires can lose useful snow traction well before reaching their minimum wear limit.
Using a Tread Depth Gauge
A tread depth gauge is the most straightforward way to measure tread depth accurately at home.
To use one:
- Place the gauge’s measuring probe into a main tread groove.
- Keep the gauge positioned squarely against the tread surface.
- Read the measurement in millimetres or 32nds of an inch.
- Repeat the measurement across several grooves and at different points around the tire.
Avoid measuring on top of the raised tread wear indicators. Check both the inner and outer tread portions where accessible, and compare readings across the tire.
If measurements vary significantly, the tire may be wearing unevenly and should be inspected.
What Is a Good Tread Depth, and When Should You Replace Your Tires?
The right time to replace a tire depends on its remaining tread, the type of tire, and the conditions you’ll be driving in.
All-Season Tires
All-season tires need sufficient tread to maintain grip in rain and other everyday driving conditions. As the grooves wear down, their ability to channel water away from the contact patch decreases.
If your all-season tires are approaching 4/32 of an inch, have them assessed, especially if you regularly drive on wet highways. Don’t wait for the legal minimum before considering replacement.
Winter Tires: Why More Tread Matters in Snow and Slush
Winter tires are designed to provide traction in cold weather, snow, and icy conditions. Their tread patterns and rubber compounds help them perform in conditions that can challenge all-season tires.
However, winter tires also need adequate tread to work effectively. Transport Canada recommends not using winter tires with less than 4 mm of tread depth for snow-covered or severe winter conditions. That’s approximately 5/32 of an inch, so a tire at 4/32 is already below that recommendation.
If you’re preparing for winter and your tires are close to this threshold, have them checked before installing them for the season.
What Uneven Tread Wear Can Tell You
Tread depth isn’t the only thing to look for. The wear pattern can also clue you into your tires’ condition.
- Wear along both outer edges: Underinflation may contribute.
- Wear concentrated in the centre: Overinflation may be contributing to the pattern.
- One edge wearing faster than the other: Alignment or suspension issues may be involved.
- Uneven patches or cupping: Wheel imbalance, worn suspension components, or other mechanical issues may be responsible.
These patterns are clues, not definitive diagnoses. Tire pressure, wheel alignment, suspension condition, and driving habits can all affect wear.
Check your tire pressure regularly and follow the recommended pressure listed on your vehicle’s tire information label. Rotating your tires according to the manufacturer’s schedule can also help promote more even wear.
If you notice significant differences between tires or unusual wear patterns, have them inspected rather than simply replacing the most visibly worn tire without checking the underlying cause.
Getting Your Tires Checked at Jiffy Lube®
A quick tread inspection can help you decide whether your tires are ready for another season or need professional attention.
At Jiffy Lube®, our tire services can help you stay on top of tire maintenance and prepare your vehicle for changing road conditions. If you’re unsure about your remaining tread depth, ask about a tire inspection.
You can also check your tire pressure as temperatures fall. Cold weather lowers tire pressure, so checking it regularly is especially important during Ontario’s winter months.
Learn more about our Tire Services and ask your local Jiffy Lube® about available services.
Conclusion
Checking your tire tread depth is a simple way to understand how much life your tires have left. A tread depth gauge provides a more accurate measurement than a coin test, while tread wear indicators can help you identify tires that have reached their wear limit.
Before Ontario’s winter weather arrives, pay particular attention to your winter tires. Adequate tread can make a difference on snow-covered and slushy roads, so don’t wait until your tires reach the legal minimum to assess whether replacement is needed.
Not sure your tires will make it through winter? Visit your nearest Jiffy Lube® to ask about a tire inspection and pressure check.
Find a Jiffy Lube® Near You
Frequently Asked Questions
Is 4/32 tread depth safe?
A tire with 4/32 of an inch of tread remaining may still be above the legal minimum for passenger vehicles in Ontario, but its ability to maintain traction in wet conditions may be reduced. For winter driving, Transport Canada recommends at least 4 mm of tread on winter tires. That’s approximately 5/32 of an inch, so a tire at 4/32 is below that recommendation. Have your tires inspected to determine whether you need to replace them.
How long do tires last in Canada?
Tire lifespan depends on the tire type, driving habits, maintenance, road conditions, and exposure to temperature changes. Rather than relying on a specific number of years, inspect your tires regularly for tread wear, damage, and signs of ageing. Follow the manufacturer’s replacement recommendations, even if the tires appear to have sufficient tread.
Do winter tires wear faster than all-seasons?
Winter tires can wear faster when used in warmer temperatures. Their softer rubber compounds are designed to remain flexible in cold weather, but warmer pavement can accelerate wear. Switching to all-season or summer tires when temperatures consistently rise can help preserve your winter tires.
Does tire age matter if the tread looks fine?
Yes. Tires can deteriorate with age even when they have plenty of tread remaining. Rubber naturally changes over time, which can affect flexibility and performance. Check the manufacturing date on the tire’s sidewall and follow the manufacturer’s recommendations. Have a qualified technician inspect older tires.
At Jiffy Lube®, we’re here to help make car maintenance easy and accessible, so you can drive with confidence and keep your vehicle on the road longer. Ready to make your next maintenance stop? Visit Jiffy Lube® for fast, friendly, and reliable service to keep your car in top shape. Drive In Today
